نوشته شده توسط : pcbonline

How To Clean Chairlifts Stairlifts can be dust magnets what is the best method and products to use to clean your stairlift. Cleaning your stair lift should be a simple straight forward job. A quick dust down twice a week with a cloth duster or feather duster should be more than adequate.

Avoid using water or cleaning solvents at all costs. For straight stairlifts with aluminium tracks/rails can be wiped over with a damp cloth (Damp Not Wet) Then buff dry with a clean cloth Rigid flex PCB.

The seat chair/carriage can be cleaned using house polish! Always spray the polish onto the cleaning cloth then rub and buff to a shine. (Never spray the polish directly onto the chair/carriage)

Spraying house polish directly onto the carriage could cause damage to components and circuit boards. If too much polish is applied it can find its way (Drip) through air vents etc. And cause S/C Short Circuits or corrode delicate components on the PCB printed circuit board.

Curved stairlift rails/tracks should never be cleaned with any type of solvents. Avoid house polish and DWD (Engineering oils) like the plague. Curved stairlifts use a system where the speed of the stairlift is monitored using an RMU! A roller sits on the rail and as your stairlift moves this roller rolls along the rail sending pulse information to the operating system.

Applying cleaning solvents to the curved rail could cause the roller to lose friction and skid, this action causes the stair lift to receive incorrect pulses and the stair lift will stop/shutdown. Typical symptoms intermittent stop starting! The stairlift will travel a few inches then stop. This symptom could also be caused through flat batteries China PCB Prototype.

Removing marks from a curved rail! A good rub with a damp cloth should remove most marks. For stubborn marks a light rub with wire wool or light gauge emery paper is all that is required. The rail should appear matt in colour not a shiny gloss colour.

Cleaning of your stair lift and rail should be undertaken by qualified engineers who should clean and lubricate the stairlift following the manufacturer's specification and guidelines on its annual service inspection.
Related Links





:: بازدید از این مطلب : 155
|
امتیاز مطلب : 0
|
تعداد امتیازدهندگان : 0
|
مجموع امتیاز : 0
تاریخ انتشار : چهار شنبه 26 خرداد 1395 | نظرات ()
مطالب مرتبط با این پست
لیست
می توانید دیدگاه خود را بنویسید


نام
آدرس ایمیل
وب سایت/بلاگ
:) :( ;) :D
;)) :X :? :P
:* =(( :O };-
:B /:) =DD :S
-) :-(( :-| :-))
نظر خصوصی

 کد را وارد نمایید:

آپلود عکس دلخواه: